In July 2005, the United States Army placed a contract on Bell Helicopters for the next generation armed reconnaissance helicopter, ARH. The ARH will replace the army's current Bell OH-58D Kiowa Warriors which have been in operation since the mid 1980s and are approaching the end of operational life.
"The ARH-70A armed reconnaissance helicopters will replace the army's current Bell OH-58D Kiowa Warriors."The $2.2bn programme is for the procurement of 368 helicopters with deliveries over eight years from 2007 to 2013. The initial $210m contract, awarded on 29 July 2005 to Bell Helicopters, covered the system design and development phase through 2007.
In June 2007, it was agreed by the US Army and Bell that the SDD phase should be extended for a year to 2008. This will conclude with a Limited User Test (LUT), followed by a decision on Low-Rate Initial Production (LRIP). Three LRIP helicopters will be produced by 2009. Entry into service is planned for 2010.
A stop work order was issued by the US Army in March 2007 because of concerns over progress and costs on the project. However in May 2007, the Army decided to lift this order and continue with the programme.
MILITARISED BELL 407 HELICOPTERThe ARH is a militarised version of the proven Bell 407 helicopter. The engine on the civil Bell 407 has been replaced by a more powerful Honeywell HTS900 turboshaft engine rated at 723kW. An example of the militarised Bell 407 fitted with the undernose FLIR Systems Brite Star II surveillance and target acquisition system was displayed at the July 2005 Paris Air Show at Le Bourget.
The militarised version of the Bell 407 fitted with Hydra 70 air-to-ground rockets made its first flight in June 2005 from Bell Helicopter's XWORX research and development centre at Arlington Municipal Airport.
The major contractors involved in the ARH program with Bell Helicopters are FLIR Systems, Honeywell, Rockwell Collins, as well as Flight Safety, Computer Sciences Corporation and L-3.
The ARH airframe will be manufactured at the Bell Helicopter Textron aerospace manufacturing facilities at Mirabel, Canada. Final assembly and installation of military equipment will take place at Bell's Fort Worth plant.
The helicopter can be equipped for light reconnaissance, light attack and insertion operations and is capable of day and night operations, in adverse weather conditions and in poor visibility.
"The US Army's ARH-70A is a militarised version of the proven Bell 407 helicopter."The US Army launched the requirement for the armed reconnaissance helicopter after the cancellation of the $39bn RAH-66 Comanche programme in early 2004. The US Army cancelled the Comanche program because it was thought the helicopter did not meet the requirement for survivability and self-defensive countermeasures, such as the ability to counter current and next generation infrared guided anti-air missiles.
ARH-70A COCKPITRockwell Collins is responsible for the ARH avionics suite, the Common Avionics Architecture System (CAAS), which is also being fitted on US Army's special operations, CH-47F and UH-60M fleets.
The CAAS includes two 6in x 8in colour active matrix liquid-crystal MFD-268 multi-function displays and CDU-7000 control display units which control communications, navigation, weapons and defensive aids.
Bell has awarded a contract to Elbit Systems for a helmet display and tracking system based on the ANVIS / HUD-24T. The system has a day / night helmet display and Line-Of-Sight (LOS) electromagnetic head-tracker.
The suite also includes an embedded GPS / inertial navigation system and Smiths Aerospace Integrated Standby Instrument System (ISIS).
RECONNAISSANCE HELICOPTER SENSORSThe sensor suite includes the Bright Star II target acquisition and sighting system developed by FLIR Systems. The sensor turret will be installed under the nose of the helicopter and incorporates a laser designator and range finder, a laser spot tracker, colour television and a forward-looking infrared camera.
ARH-70A WEAPONSThe helicopter will be armed with a variety of weapons to suit the mission requirements. The helicopter is capable of deploying AGM-114 Hellfire missiles, GAU-19 (12.75mm) Gatling gun pods which fire at 2,000 rounds a minute, Hydra 70 air-to-ground rockets and up to seven 2.75in guided or unguided rockets such as the Folding-fin Aerial Rocket pods (FAR pods).
The helicopter will be fitted with an electronic warfare suite including active and passive countermeasures.
"The ARH-70A will be armed with a variety of weapons to suit the mission requirements."ENGINEThe ARH-70A is powered by one Honeywell HTS900-2 turbine engine equipped with dual channel Full Authority Digital Engine Control (FADEC) system. The HTS900-2 is rated at 970shp (723kW).
PERFORMANCEThe performance of the ARH, the militarised 407, is modified by the additional weight and different aerodynamic properties based on the weapons pylons, FLIR pod and other mission equipment.
Typical approximate performance parameters are range of 212km and an endurance of two hours, according to the mission configuration and battlefield flight profiles.
HELICOPTER MANOEUVRABILITYThe helicopter is highly manoeuvrable with exceptional low hovering capability in restricted air spaces such as in urban environments. Two armed reconnaissance helicopters can be transported in a C-130 Hercules transport aircraft and be ready to fly in 15 minutes.
"The ARH-70A armed reconnaissance helicopters will replace the army's current Bell OH-58D Kiowa Warriors."The $2.2bn programme is for the procurement of 368 helicopters with deliveries over eight years from 2007 to 2013. The initial $210m contract, awarded on 29 July 2005 to Bell Helicopters, covered the system design and development phase through 2007.
In June 2007, it was agreed by the US Army and Bell that the SDD phase should be extended for a year to 2008. This will conclude with a Limited User Test (LUT), followed by a decision on Low-Rate Initial Production (LRIP). Three LRIP helicopters will be produced by 2009. Entry into service is planned for 2010.
A stop work order was issued by the US Army in March 2007 because of concerns over progress and costs on the project. However in May 2007, the Army decided to lift this order and continue with the programme.
MILITARISED BELL 407 HELICOPTERThe ARH is a militarised version of the proven Bell 407 helicopter. The engine on the civil Bell 407 has been replaced by a more powerful Honeywell HTS900 turboshaft engine rated at 723kW. An example of the militarised Bell 407 fitted with the undernose FLIR Systems Brite Star II surveillance and target acquisition system was displayed at the July 2005 Paris Air Show at Le Bourget.
The militarised version of the Bell 407 fitted with Hydra 70 air-to-ground rockets made its first flight in June 2005 from Bell Helicopter's XWORX research and development centre at Arlington Municipal Airport.
The major contractors involved in the ARH program with Bell Helicopters are FLIR Systems, Honeywell, Rockwell Collins, as well as Flight Safety, Computer Sciences Corporation and L-3.
The ARH airframe will be manufactured at the Bell Helicopter Textron aerospace manufacturing facilities at Mirabel, Canada. Final assembly and installation of military equipment will take place at Bell's Fort Worth plant.
The helicopter can be equipped for light reconnaissance, light attack and insertion operations and is capable of day and night operations, in adverse weather conditions and in poor visibility.
"The US Army's ARH-70A is a militarised version of the proven Bell 407 helicopter."The US Army launched the requirement for the armed reconnaissance helicopter after the cancellation of the $39bn RAH-66 Comanche programme in early 2004. The US Army cancelled the Comanche program because it was thought the helicopter did not meet the requirement for survivability and self-defensive countermeasures, such as the ability to counter current and next generation infrared guided anti-air missiles.
ARH-70A COCKPITRockwell Collins is responsible for the ARH avionics suite, the Common Avionics Architecture System (CAAS), which is also being fitted on US Army's special operations, CH-47F and UH-60M fleets.
The CAAS includes two 6in x 8in colour active matrix liquid-crystal MFD-268 multi-function displays and CDU-7000 control display units which control communications, navigation, weapons and defensive aids.
Bell has awarded a contract to Elbit Systems for a helmet display and tracking system based on the ANVIS / HUD-24T. The system has a day / night helmet display and Line-Of-Sight (LOS) electromagnetic head-tracker.
The suite also includes an embedded GPS / inertial navigation system and Smiths Aerospace Integrated Standby Instrument System (ISIS).
RECONNAISSANCE HELICOPTER SENSORSThe sensor suite includes the Bright Star II target acquisition and sighting system developed by FLIR Systems. The sensor turret will be installed under the nose of the helicopter and incorporates a laser designator and range finder, a laser spot tracker, colour television and a forward-looking infrared camera.
ARH-70A WEAPONSThe helicopter will be armed with a variety of weapons to suit the mission requirements. The helicopter is capable of deploying AGM-114 Hellfire missiles, GAU-19 (12.75mm) Gatling gun pods which fire at 2,000 rounds a minute, Hydra 70 air-to-ground rockets and up to seven 2.75in guided or unguided rockets such as the Folding-fin Aerial Rocket pods (FAR pods).
The helicopter will be fitted with an electronic warfare suite including active and passive countermeasures.
"The ARH-70A will be armed with a variety of weapons to suit the mission requirements."ENGINEThe ARH-70A is powered by one Honeywell HTS900-2 turbine engine equipped with dual channel Full Authority Digital Engine Control (FADEC) system. The HTS900-2 is rated at 970shp (723kW).
PERFORMANCEThe performance of the ARH, the militarised 407, is modified by the additional weight and different aerodynamic properties based on the weapons pylons, FLIR pod and other mission equipment.
Typical approximate performance parameters are range of 212km and an endurance of two hours, according to the mission configuration and battlefield flight profiles.
HELICOPTER MANOEUVRABILITYThe helicopter is highly manoeuvrable with exceptional low hovering capability in restricted air spaces such as in urban environments. Two armed reconnaissance helicopters can be transported in a C-130 Hercules transport aircraft and be ready to fly in 15 minutes.
10 comments:
With TreadClimber, you may never ever encounter jarring
from the joints.
Look into my blog; Personal Site
Wish to obtain a muscular, lean and ripped human body?
Review my web site; bowflex adjustable dumbbells
The to begin with thing you ought to do is familiarize yourself using
the risk factors involved.
Have a look at my site: dumbbell sets
It is proposed to incorporate multi vitamins being a part on
the P90X training session software.
Feel free to visit my web blog - dumbbell clean
When you are intending to operate the AC, then operate it.
Here is my web site :: Top
Again, inquire yourself what it truly is you call for from
the dumbbells; would you like dumbbells that require a docking station which may render them a little bulkier than other versions, or do you want dumbbells which have no
docking station and cut down or raise in dimensions accordingly
on the selected pounds resistance, and many others?
Here is my homepage; http://www.getfitnstrong.com/bowflex-dumbbells/3-reasons-bowflex-selecttech-552-dumbbells/
Bent In excess of Dumbbell Rows - The rowing work
out together with the use of dumbbells, allows for the progress with the rear shoulder deltoids.
Here is my page; www.getfitnstrong.com
But what we don't hear considerably about could be the practicality on the ergonomic design and style and just how resilient the Bowflex equipment definitely are.
My website :: adjustable weights
In addition, it allows me to physical exercise my lower again a little at the same time.
Feel free to visit my blog; http://www.getfitnstrong.com/bowflex-dumbbells/bowflex-selecttech-552-adjustable-dumbbells/
Al you need to do is acquire the stickers off the conclusion of your dumbbells and place a socket on either aspect and
tighten which will secure the plates.
My homepage ... Recommended Browsing
Post a Comment